Regviz

Freescale Semiconductor /MKE14Z7 /LPUART2 /MODIR

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as MODIR

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MKE14Z7/LPUART2/MODIR#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (0)TXCTSE 0 (0)TXRTSE 0 (0)TXRTSPOL 0 (0)RXRTSE 0 (0)TXCTSC 0 (0)TXCTSSRC 0RTSWATER0 (00)TNP0 (0)IREN

TXCTSC=0, TXRTSE=0, IREN=0, TNP=00, TXCTSE=0, TXCTSSRC=0, TXRTSPOL=0, RXRTSE=0

Description

LPUART Modem IrDA Register

Fields

TXCTSE

Transmitter clear-to-send enable

0 (0): CTS has no effect on the transmitter.

1 (1): Enables clear-to-send operation. The transmitter checks the state of CTS each time it is ready to send a character. If CTS is asserted, the character is sent. If CTS is deasserted, the signal TXD remains in the mark state and transmission is delayed until CTS is asserted. Changes in CTS as a character is being sent do not affect its transmission.
TXRTSE

Transmitter request-to-send enable

0 (0): The transmitter has no effect on RTS.

1 (1): When a character is placed into an empty transmitter data buffer , RTS asserts one bit time before the start bit is transmitted. RTS deasserts one bit time after all characters in the transmitter data buffer and shift register are completely sent, including the last stop bit.
TXRTSPOL

Transmitter request-to-send polarity

0 (0): Transmitter RTS is active low.

1 (1): Transmitter RTS is active high.
RXRTSE

Receiver request-to-send enable

0 (0): The receiver has no effect on RTS.
TXCTSC

Transmit CTS Configuration

0 (0): CTS input is sampled at the start of each character.

1 (1): CTS input is sampled when the transmitter is idle.
TXCTSSRC

Transmit CTS Source

0 (0): CTS input is the CTS_B pin.

1 (1): CTS input is the inverted Receiver Match result.
RTSWATER

Receive RTS Configuration
TNP

Transmitter narrow pulse

0 (00): 1/OSR.

1 (01): 2/OSR.

2 (10): 3/OSR.

3 (11): 4/OSR.
IREN

Infrared enable

0 (0): IR disabled.

1 (1): IR enabled.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data